商品

Bus cable

Connection cable 3m

Connection connector

control circuit

control circuit

Motor kit

Indracontrol

FILTER, AIR LINE ACCESSORIES, AERATION FILTER, APPL= BREATHER FILTER, PTCL_SMI= 15.0 MICRONS

VALVE, CHECK, HYDRAULIC, MOD_SR= CHECK VALVE 1IN G 0.5 BAR, FLOW_HYD= 42.0 G/MIN, 0.5 BAR

COMPUTER, CENTRAL PROCESSOR UNIT (CPU), INDRADRIVE CTRL UNIT, APPL= SERVO DRIVE CSH, TP= SERCOS III,SSI,ENCODER,DISPLAY

COMPUTER, CENTRAL PROCESSOR UNIT (CPU), SERVO DRIVE, APPL= CONTROL UNIT, TP= SERCOS III,ENCODER,SAFE

COMPUTER, CENTRAL PROCESSOR UNIT (CPU), CONTROL UNIT, APPL= ENCODER, TP= CROSS COMM. DRIVE,SAFE,DISP

VALVE, PRESSURE LIMITER, HYDRAULIC, TP= RELIEF VALVE, DIRECT OPERETED, FLOW_HYD= 330.0 L/MIN, PRESS_RT= 200.0 BAR, CONCT_TP= G 1/2, MOUNT= FOR SUBP...

VALVE, PRESSURE LIMITER, HYDRAULIC, TP= RELIEF DIRECT OPERATED, PRESS_RT= 400.0 BAR, CONCT_TP= G 1/4, MOUNT= ANY, CTRL_ADJ= MANUAL

ACTUATOR LINEAR ELECTRICAL AND ACCESSORIES, ELECTROMECHANICAL CYLINDER, STROKE= 200.0 MM

BALL SCREW ASSY, ACTUATOR= NONE, SHAFT_OD= 50.0 MM, PITCH= 10.0 MM, SHAFT_L= 725.0 MM, DRCT_P= RIGHT

SWITCH, PRESSURE, HYDRO-ELECTRIC PRESSURE SWITCH, MAXPRESS= 100.0 BAR, CONCT_TP= CONNECTOR DIN EN 175301-803, MOUNT= PIPELINE INSTALLATION, TP_CTC=...

SWITCH, PRESSURE, HYDRO-ELECTRIC PRESSURE SWITCH, MAXPRESS= 100.0 BAR, CONCT_TP= CONNECTOR DIN EN 175301-803, MOUNT= PIPELINE INSTALLATION, TP_CTC=...

SWITCH, PRESSURE, HYDRO-ELECTRIC PRESSURE SWITCH, MAXPRESS= 200.0 BAR, CONCT_TP= CONNECTOR DIN EN 175301-803, TP_CTC= PIPELINE INSTALLATION

TRANSDUCER (PRESSURE, CURRENT), DESC_P= PRESSURE TRANSDUCER, INLETSIG= 250 BARS, OUT_SIG= 4-20 MA, 0.1-10 V, V_SPLY= 16-36 VDC

R15801

GUIDE,LINEAR BALL SCREW, ACCESSORIES, LINEAR MODULES, APPL=QITH TOOTHED BELT DRIVE, MATERIAL=ALUMINIUM, SHAFT_L=710.0 MM

PUMP, GEAR, INLETSIZ= 51 MM, OUT_SZ= 25.4 MM, OUT_FLW= 72.8 L/MIN, OUT_PRE= 6,000.0 PSI, TP_NRJ= MECHANICAL

PUMP, VANE, INLETSIZ= 14 CM3, OUT_FLW= 21.0 L/MIN, OUT_PRE= 160.0 BAR, TP_NRJ= ELECTRICAL

CARD MODULE I/O, PLC (AUTOMATE), TRANSISTOR, TRIAC, RELAY, TP_MOD= DIGITAL, #OUTPUT= 32.0

BALL SCREW ASSY, ACTUATOR= OTHER, SHAFT_OD= 20.0 MM, PITCH= 5.0 MM, SHAFT_L= 300.0 MM, DRCT_P= RIGHT

BALL SCREW ASSY, ACTUATOR= OTHER, SHAFT_OD= 20.0 MM, PITCH= 5.0 MM, SHAFT_L= 380.0 MM, DRCT_P= RIGHT

BEARING ASSY, LINEAR/POSITIONER, MLR LINEAR MODULE, LENGTH= 1,085.0 MM, WIDTH= 110.0 MM, TOTAL_H= 109.5 MM, STROKE= 710.0 MM

BALL SCREW ASSY, ACTUATOR= OTHER, SHAFT_OD= 20.0 MM, PITCH= 5.0 MM, SHAFT_L= 380.0 MM, DRCT_P= RIGHT

BALL SCREW ASSY, ACTUATOR= OTHER, SHAFT_OD= 20.0 MM, PITCH= 5.0 MM, SHAFT_L= 300.0 MM, DRCT_P= RIGHT

BUSHING, BALL, ID_A= 40.0 MM, OD_B= 25.0 MM, LENGTH= 58.0 MM, WIPER= NO, TP= CLOSED, BDY_MTLS= HARDENED STEEL

BEARING ASSY, LINEAR/POSITIONER, MLR LINEAR MODULE, LENGTH= 1,085.0 MM, WIDTH= 110.0 MM, TOTAL_H= 109.5 MM, STROKE= 710.0 MM

BALL SCREW ASSY, ACTUATOR= NONE, SHAFT_OD= 50.0 MM, PITCH= 20.0 MM, SHAFT_L= 755.0 MM, DRCT_P= RIGHT

BALL SCREW ASSY, ACTUATOR= NONE, SHAFT_OD= 50.0 MM, PITCH= 20.0 MM, SHAFT_L= 755.0 MM, DRCT_P= RIGHT

BEARING, PILLOW-BLOCK, ID_D= 10.0 MM, SHAFT_H= 32.0 MM, HOLE_SCG= 9.0 MM, MOD_SR= SEB-L

GUIDE, LINEAR/BALL SCREW, ACCESSORIES, PILLOW BLOCK UNIT, APPL= FOR BALL SCREW ASSEMBLY, SHAFT_D= 20.0 MM, MATERIAL= STEEL